An art cart is the quiet star of a craft room, and it turns out to be the best gift wrapping station you can build. A rolling cart holds the ribbon, tape, tags and scissors, and it rolls to the table when it is time to wrap and into the closet when you are done. This list shows how to turn a three-tier art cart into a station: the cart, the tools that hang off it and the pieces that live on the table beside it. It is a different list from our gift wrapping essentials, which covers the paper, ribbon and bows themselves. This one is about where it all lives.
Looking for the supplies to put on the cart? This list covers the station itself: the cart, the hooks, the tools and the storage. For the wrapping paper, ribbon, tissue, gift bags, boxes and tags that go on it, start with our Top 10 Gift Wrapping Essentials, then come back here to give it all a home.
#10 — XUXU 12 Pack Double Sided Tape Rollers

Nobody has ever found a clean spot for the strip of tape on a gift tag, and the tape ends up showing on the front.
This is a 12-pack of double-sided tape rollers. Each one rolls a strip of adhesive onto paper with no drying time and no wrinkles, and the listing says the adhesive is acid-free and photo safe. They are made for scrapbooking, but they work for the invisible seam on a wrapped box, a tag or a layered bow. The weakness is that the adhesive is permanent, so there are no do-overs on a crooked tag. Twelve is a lot of rollers, and that is the point: you can park one in every hanging cup and drawer.
A hidden seam is the difference between a wrapped gift and a taped gift.
- Why it’s #10: No visible tape on the finished gift, and nothing to dry.
- Best for: Invisible seams, tags, layered bows and tucking a roller into every spot on the cart.
#9 — iBayam 8-Inch All Purpose Scissors, 3-Pack

The one pair of scissors in the house has a way of disappearing the second you need it, usually with a roll of ribbon already half unspooled.
This pack has three pairs of 8-inch scissors with straight handles, and the listing describes 2.5 mm thickened stainless steel blades with a non-slip handle and an inner rubber cushion. They cut paper, ribbon, tape and cardboard, so one pair covers the whole station. The weakness is that these are general-purpose scissors, not a dedicated ribbon pair, so a fabric-only blade is still the better choice for fine satin. With three in the pack, you can leave one on the cart, one on the pegboard hook and one in the drawer.
Three pairs means the scissors stay on the cart.
- Why it’s #9: A pair for every spot on the cart, so you never go hunting for them.
- Best for: Paper, ribbon and tape cutting, and families who share one wrapping spot.
#8 — LEZIOA 5 Pack Hanging Cup Holders

Every cart has the same problem: the tools sink to the bottom basket and you dig through the pile.
This is a set of 5 plastic cup holders with 4 hooks, made to hang from the side of a rolling cart. The listing gives each cup as 2.76 inches wide, 4.37 inches long at the top and 4.6 inches tall. They hold scissors, pens, tape rollers, a tag marker or a small set of bows right at hand height. The weakness is the size: these are small cups, so a full tape gun or a big spool of ribbon will not fit in one. Your cart may already come with a few cups, and this pack is for adding more.
A cup for every tool, hanging exactly where your hand lands.
- Why it’s #8: Five cups and four hooks put the small tools within reach without using a shelf.
- Best for: Scissors, pens, tape rollers and tags, plus anyone whose cart already has a pegboard or rail.
#7 — Simplify 5 Compartment Gift Supply Storage Box

Gift bows have a way of crushing themselves into the bottom of a basket, where they come out flat and sad.
This is a 2-tier storage box, 9.5 by 9.5 by 4.5 inches, with 5 compartments, a clear top lid so you can see what is inside and 2 snap-lock side handles. It is meant for bows, tags, ribbon pieces and small wrapping accessories. The weakness is the look: the lid and handles are red, which reads like a holiday box, and it will not hide on a minimalist cart. At 9.5 inches square, it fits the cart’s 11.8-inch depth, so it slides onto the middle shelf.
Everything small has a compartment.
- Why it’s #7: Clear lid, snap handles and 5 compartments keep the bows and tags from crushing each other.
- Best for: Bows, tags, stickers and the small stuff that gets lost on a shelf.
#6 — U.S. Art Supply 9 x 12 Inch Self-Healing Cutting Mat

Cutting a ribbon on a nice table is a good way to learn what a scratch looks like.
This is a 5-ply self-healing cutting mat measuring 9 by 12 inches, with a 1/2-inch grid, 1/8-inch marks and 45 and 60 degree angle guides. It is double-sided in pink and blue, and the listing says the surface is non-slip. It protects the table when you cut ribbon, tags and tape strips. The weakness is the size: 9 by 12 is a small mat, so it handles ribbon and tags but not a full sheet of wrapping paper. We picked a small one on purpose, because the cart top is only 16.3 inches wide and a bigger mat would not fit there.
A small mat that fits where a big one never would.
- Why it’s #6: The grid makes it easy to cut ribbon to the same length every time.
- Best for: Ribbon and tag cutting, and tables that you would like to keep scratch-free.
#5 — Officemate 2-in-1 Heavy Duty Tape Dispenser

Anyone who has wrapped a present one-handed knows the moment the tape roll flies across the table.
This is a weighted tape dispenser with a 5.5 lb base and rubber feet, so it stays put when you pull. It holds two rolls at once, and the listing says it fits 1-inch and 3-inch cores, with room for standard tape and 2-inch packing tape. It has a built-in blade for a clean cut, and one hand is enough to use it. The weakness is that a 5.5 lb dispenser takes up a good part of a small cart top, so it works better on the table beside the cart than on the cart itself. Keep clear tape in one side and double-sided or colored tape in the other.
Two tapes, one hand, no sliding.
- Why it’s #5: The weighted base means one-handed tearing with no tape flying off.
- Best for: Wrapping tables, tape stations and shared craft spaces.
#4 — PUNLUXU Wooden Ribbon Storage Rack

Ribbon in a drawer turns into one very large knot by the second week of December.
This wooden rack measures about 15.7 by 5.9 by 15.7 inches and has 4 spindles that hold spools, plus a printed ruler on the front for measuring and 2 hooks on the back of the side boards for hanging scissors. It comes with a screwdriver and 8 rubber rings so the spools do not slip, and the ribbons in the photos are not included. The weakness is that you assemble it yourself with a few screws, and its 15.7-inch width takes up almost the whole cart top. That is the right place for it, though: spools at eye level, with a ruler built in.
Pull a length, measure it and cut, all in one spot.
- Why it’s #4: A ruler and scissor hooks on a spool rack mean ribbon is the easiest thing at the station.
- Best for: Ribbon spools, craft rolls and anyone tired of tangled ribbon.
#3 — Wrapping Paper Storage with 4 Adjustable Rods

The 30-inch wrapping paper roll is the one thing a small art cart simply will not swallow.
This rolling organizer has 4 adjustable rods for rolls of different sizes, a built-in 3-tier ribbon holder, 2 hooks and 12 reusable slap-band clips in red, green and white that keep rolls from unrolling. It stores paper, ribbon, scissors, tape and gift bags in one standing rack. The weakness is that it is really a second station, so it takes more floor space than the cart does. Use it as the home for full-size rolls next to the cart, or skip it if you buy narrower rolls that fit the baskets. For ideas on what to put on the rods, see our gift wrapping essentials list.
The place for the long rolls your cart cannot hold.
- Why it’s #3: Adjustable rods hold rolls of different sizes, and the slap bands stop them from unrolling.
- Best for: Full-size paper rolls, bigger collections and anyone who wraps year-round.
#2 — Wrap Buddies Tabletop Gift Wrapping Station, Set of 2

Wrapping a gift with one hand holding the paper down and the other hunting for tape is an everyday tragedy.
This is a set of 2 clamps that grip a table or countertop. They hold a roll of wrapping paper so you can pull, measure and cut, and each one has a tape dispenser built in so you can tear tape with one hand. The listing says they adjust to fit any size roll and press together for storage. The weakness is that they are built for a table or counter edge, so check that your cart top is thin enough to grip before counting on them there. The wrapping table next to the cart is the safe spot.
Two clamps, one roll of paper and tape that stays in reach.
- Why it’s #2: The paper is held in place and the tape is built in, so wrapping needs one free hand.
- Best for: Wrapping tables, kitchen counters and anyone who wraps alone.
#1 — 3-Tier Rolling Utility Cart with Drawer, Wood Top and Pegboards (White)

An art cart is a great idea until it holds five pencils and a very large silence.
This is the cart that does the work. It has a wood-look MDF top with a metal drawer under it, then two more tiers of metal baskets. Both sides have metal pegboards (9.25 by 11 inches each), and it comes with 6 hooks and 3 hanging cups. The steel frame is rated for 50 lbs per shelf, and the four wheels roll on carpet, wood or tile, with two that lock. It measures 16.3 by 11.8 by 28.7 inches. The weakness is the width: at 16.3 inches wide, a standard full-size roll of wrapping paper will not lie flat in a basket, so shorter 17-inch rolls or the rod rack in #3 handle the paper. The drawer hides the small stuff, the pegboards hold the tools and the cart rolls to the table when you need it.
The cart is the station: everything has a place and it rolls to the closet when you are done.
- Why it’s #1: A drawer, two pegboards, hooks, cups and locking wheels turn a plain craft cart into a wrapping station.
- Best for: Small spaces, shared craft rooms and anyone who wants a mobile station that tucks away.
Bottom Line
If you only buy one thing, buy the cart. Everything else on this list either hangs on it, sits in it or works beside it. Here is the layout we would set up. Put the ribbon rack on the top, with the scissors on its side hooks. Use the drawer for tape rollers and tags. Hang the cups on the pegboards for scissors and pens, and put the gift supply box on the middle shelf. Keep rolled paper in the rod rack or the bottom basket. Roll it to a table, clamp on the Wrap Buddies, set down the mat and the weighted tape dispenser, and you have a full station that disappears when you are done. The station is only half of the job. Stock it with the paper, ribbon, tissue and bows from our Top 10 Gift Wrapping Essentials, and you are ready for the whole season.

Leave a Reply